SUSPENDED CEILING SYSTEM

HOW TO INSTALL SUSPENDED CEILING

1. Mark a level line around the room at the required ceiling height.
2. Fasten the wall angle to the wall using either nails or screws.
3. Allow an approximate of 3" of room between the floor joists and the drop ceiling for the tile installation.
4. Install eye lags in joists at proper hanger locations.
5. Loop 18 gauge wire through eye lags and twists at least 4 times to secure.
6. Bend hanger wire 900 at point of desired ceiling height. Use a tight string spanning the room from wall angle to wall angle to ensure all hangers are at the same height.
7. Begin by installing main tees at mid - point of room working out the perimeter. This ensures cut tiles are at the perimeter.
8. Ensure main tee slots are perfectly aligned with each other to enable easy and accurate installations of cross tees.
9. Install 4' cross tees at every 2' along the main tees.
10. Always refer to your room outline.
11. If you are using 2' x 2' tiles, install 2' cross tees at mid-point of 4' cross tees.
12.Lower ceiling tiles.

MAIN TEE

  • Double web construction
  • Web height 38mm with rectangular top bulb
  • 24mm bottom flange with pre-finished steel capping
  • Hanger wire holes every 6" interval on main runners for easy installatio
LENGTH    HEIGTH   WIDTH    
12 ft. 38 mm 24 mm.

Baily Easy Lock Main Tee is hung from above the hanger wire. They run between the wall angles and from the support system of your ceiling.

CROSS TEE

  • Double web construction
  • Web height 28mm with rectangular top bulb
  • 24mm bottom flange with pre-finished steel capping
  • Override at each end
  • Easy lock on end detail
  • Feature for fast, easy assembly
LENGTH    HEIGTH   WIDTH    
12 ft. 28 mm 24 mm
4 ft 28 mm 24 mm

Baily Easy Lock Cross Tee - they run perpendicular to and are snapped into the main tees to support the individual ceiling panels. Cross tees offered in standard 2' (610mm) and 4' (1220mm) lengths.

WALL ANGLE

  • Hemmed with pre - finished exposed flanges.
LENGTH    HEIGTH   WIDTH    
10 ft. 24 mm 24 mm

Baily Easy Lock Cross Tee - they run perpendicular to and are snapped into the main tees to support the individual ceiling panels. Cross tees offered in standard 2' (610mm) and 4' (1220mm) lengths.

About Us

                 Ultra Petronne Interior Supply Corp. is one of the largest manufacturers of light metal frame in the Philippines. Our products include ceiling framing systems, dry wall framing systems, hat-type purlins. We also manufacture roof tiles, decking materials, and roll-up doors.                The company, formerly known as Petronne Trading, was established in September 1994 and started as a retailer...

Read More

Newsletter


Address

100 Granada St. Valencia Quezon City, Philippines